The below picture highlights the LCD features. Function Key Layout A. The below picture shows the six function keys used in programming and operation of your indoor weather station V. Program Mode The program mode is laid out in a manner that allows you to program each function separately, or you can follow the instructions entirely to program the indoor weather center. Page Hour Time Mode Setting 6.
The time will be based on the time zone selected. Setting The Date Manually 1. Page Forecast Sensitivity Setting 6. Forecast Sensitivity Setting 1. Time Alarm Setting and Operation 1. The alarm time will begin to flash to the right of the moon phase. Press and release the IN button to adjust the hour.
Page Moon Phase B. Moon Phase 1. There are 12 moon phases shown on the indoor weather station; the white portion signifies the portion of the moon visible in the sky. Thus, when the moon icon is all white, it is a full moon. The indoor weather station is programmed with all moon phases from the year until These extra remote sensors can be purchased through the same dealer as this unit. A TX4U will monitor the temperature and humidity, a Page Comfort Icon F.
The WS averages past air-pressure readings to provide an accurate forecast— Page Weather Icons 1. Weather Icons There are 3 possible weather icons that will be displayed at various times in the center of the indoor weather station. The indoor weather station is programmed with all moon phases from the year until Outdoor Minimum and Maximum Temperature and Humidity The indoor weather station automatically stores the minimum and maximum outdoor temperature and humidity.
The minimum and maximum values are updated automatically when a new minimum or maximum is recorded, or until manually reset. Page Comfort Icon In sequential order, install batteries following the same battery installation procedures seen in Detailed Set-Up Guide section of this manual. Install batteries into the indoor weather station. Follow the Detailed Set-Up Guide for programming and operating instructions. Page Weather Icons 1.
Weather Icons There are 3 possible weather icons that will be displayed at various times in the center of the indoor weather station. Sunny—indicates that the weather is expected to improve not that the weather will be sunny. Sun with Clouds—indicates that the weather is expected to be fair not that the weather will be sunny with clouds.
Barometric Air Pressure Reading 1. The actual barometric air pressure is displayed directly under the weather forecast icon 2. The relative air pressure is calibrated by the user through the programming mode.
Page Mounting Place all units in their desired location, and wait approximately 15 minutes before permanently mounting to ensure that there is proper reception. If the indoor weather station loses the signal from the remote sensor, it will display the last temperature reading for 15 minutes.
Place the indoor weather station onto the screw using the hanging hole on the backside. Gently pull the indoor weather station down to lock the screw into place. Extreme temperatures, vibration, and shock should be avoided to prevent damage to the units. Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents; they may mark the displays and casings.
If there is a consistent problem, please call La Crosse Technology. Page Specifications This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures.
Click Here to register your product. Close menu. La Crosse View. Product Registration. Technical Support. Customer Service. Log in. Close cart.
0コメント