Product Line. Print Servers. Product Name. Marketing Information. Cabling Type. Data Link Protocol. Ethernet, Fast Ethernet. Data Transfer Rate. Remote Management Protocol. Status Indicators. Link activity, power. Processor Clock Speed. Thank you for purchasing the AXIS This product has been developed to connect your printer anywhere in your network, allowing all network users access to shared printer resources.
This manual is applicable for the AXIS print server with firmware version 1. It is intended for everyone involved in installing and managing the print server. To fully benefit from this manual, you should be familiar with basic networking principles. These instructions are based on the settings in a new and unconfigured print server. To reload the default parameters, you can perform a Factory Default, which will restore all default settings.
See The Test Button , on page Axis increases the value of network solutions. The company is an innovative market leader in network video and print servers. Axis' products and solutions are focused on applications such as security surveillance, remote monitoring and document management. The products are based on in-house developed chip technology, which is also sold to third parties.
Axis operates globally with offices in 14 countries and in cooperation with distributors, system integrators and OEM partners in 70 countries.
Information about Axis can be found at www. Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your Axis reseller will forward your queries through the appropriate channels to ensure a rapid response. Search by product, category or phrase. Network indicator.
AXIS is developed to network Canon printers and multifunctional products. The installation of the AXIS and its integration into the network is performed using one of these software combinations:. ECP high-speed communication is supported. This allows you to quickly update and enhance the operational features of your AXIS when new print server software becomes available. Hi-Speed is not supported. AXIS is featured with two ports for ease of integration with most Canon printers. There is however no support for handling two connected printers simultaneously.
Connect the Hardware , on page Set the IP Address , on page Windows Installation , on page Locate the serial number , found on the underside label of the print server, and write it down. You will need this number to configure the print server. Connect the print server to the network using a shielded twisted pair category 5 RJ45 cable, 10baseT or baseTX. Switch on the printer and make sure it is ready for use.
Connect the Power Adapter to the print server. The power indicator will light up. When the network indicator starts to flash, the print server is correctly connected to the network.
Optionally, you can mount the print server e. See Backside label of print server , on page Select a print server from the serial number list. The Set IP Address dialog appears. When assigning a static IP address you also have to define the Subnet Mask and. Click OK to save your settings. You have now finished the procedure of setting the IP address. Continue to Windows Installation , on page If the host returns Reply from If the host returns Request time out You have now set the IP address of the print server.
You will need this number to configure the AXIS Page 3 5. Turn the Canon device on and wait for ready mode. Connect AXIS to the external power supply connector using the power adapter.
The power indicator will light up. When the network indicator starts to flash, the AXIS is correctly connected to the network. Page 4 Mount Print Server Important: Do not drill into the Canon device; the provided wall screw is an optional wall mount.
It is recommended that you do not leave the AXIS hanging from the Canon device, please affix to the Canon device. An AXIS window will pop up. Page 7 Click [Next], then [Finish]. Open IP JumpStarter. Select the AXIS from the serial number list. Once complete, click [Open]. Click [Next]. Page 10 [New Port]. Click [Add] and [OK].
0コメント