Use the Sizing Tool to get an idea of your power requirements. They can analyze your home's electrical load and specify and install your generator system.
RESAL generators come with a transfer switch. RESA generators come with a controller that offers access to advanced settings; a transfer switch is purchased separately. Check our Sales and Service Locator for a location near you. Code requirements for installing standby generator systems vary nationwide.
That's why Kohler recommends having a factory-authorized dealer install your system, since he or she will be familiar with local and national codes, make sure the generator is properly sized, and avoid code issues with local inspectors. Generators ship without batteries to ensure that the freshest possible battery is installed at the jobsite.
Your Operation Manual recommends the proper battery for your generator model. Batteries come in sizes that are readily available at any battery or auto-parts store. It's a good idea to have an authorized KOHLER dealer perform an onsite analysis to determine which generator and transfer switch offer the best solution for your home.
Or, use our online ATS selector. What is the difference between a transfer switch that's rated for a service entrance and one that's rated for a non-service entrance? A service-entry-rated switch comes equipped with a main-line disconnect breaker built into the transfer switch. This is a nationwide code requirement when the transfer switch is wired directly into the incoming main power line for whole-house power. A non-service-entry-rated switch requires the addition of a disconnect breaker at the jobsite.
The service-entry-rated switch saves you time and money during the installation process. We recommend checking the oil level after every hours of operation, depending on the size and model of the generator.
Oil change and filter change frequency and other routine maintenance varies per model, especially during periods of extended power outage. Check the Operation Manual included with your generator for a complete list of required maintenance procedures and schedules.
Open the generator hood or access door and flip the circuit breaker to the "off" position you'll find the breaker near the digital controller. This shuts off power to the house the load. It's a good idea to run the generator with no load for minutes.
Then press the "off" button on the controller. Im sure as a great company this will be resolved sooner than later. Also I have notice the online version on Google chrome is identical and has the same bug of not allowing you to go back to the main page after viewing notifications. I have to log out and back in to get back to main screen. Both the I phone app and Chrome do the same thing.
Furthermore I cannot get to the link via Microsoft Edge or Internet explorer anymore. They both are showing errors with credentials. Be happy to update my review to 5 stars when resolved. We used OnCue for the first few years we had our whole house generator. I liked it, but was only able to monitor it from my laptop while traveling RV.
I like that we can both monitor using OnCue Plus from our phones and iPads as well as laptops. We use it to monitor the generator when we are away but rarely if ever use it to control the unit. My only issue does not appear to have anything to do with OnCue Plus. This fault requires using the keypad on the generator to put it back in AUTO mode. This always seems to happen under extreme weather conditions when we are away from home.
One of the main reasons we have this generator is to ensure we have power under exactly these kinds of circumstances.
A must-have if you have a Koehler generator but You cannot set the controller time from OnCue. You have to get the key and go to the generator. You cannot set or reset the exercise time from OnCue. If you remotely start the generator, that becomes the new exercise start time and resets the exercise interval. You cannot see the output current of the generator.
You cannot read the engine oil pressure. At least on the 20RESA - just the oil temperature and the temperature is not even close to accurate. It randomly looses the network connection and will not always reconnect without a hardware reset which requires removing AC power and disconnecting the genset battery. Then it will immediately reconnect but this is a lot of effort and could be fixed in the controller firmware.
The developer, Kohler Co. The following data may be collected and linked to your identity:. The following data may be collected but it is not linked to your identity:.
0コメント